Publish Time: 2022-01-21 Origin: Site
Press the "SET" key to enter the Modbus parameter setting interface. The Modbus parameter setting is as follows:
• BPS:The baud rate of Modbus communication is 9600 in the field, which does not need to be changed
• PARITY:Data verification method for Modbus communication, no verification on site, no modification required
• ADDRESS:The communication address of the Modbus slave node is changed to the corresponding address according to the junction box number.
Press the "SET" key to enter the parameter setting interface, then press the key on the panel
② Sequence of combiner box recovery after module replacement
Close the fuse to recover, and then close the circuit breaker.