Availability: | |
---|---|
Application Diagram
Clean the surface of the position where the tail module needs to be installed.
Tear off the adhesive of the 3M glue behind the back buckle, and paste it on the cleaned position.
Clip the tail module into the back buckle (The picture is for reference, which can be adjusted according to the actual situation).
Connect the input and output terminals of the tail modules according to the sequence shown in the figure below.
Component | Model | Item | Parameter |
Tail Module | FR-PVMS-TSXX | Input operating voltage range | 12V-60V |
Accuracy of voltage measuring | ±0.2V | ||
Maximum System Voltage | 1500V | ||
Output voltage after shutdown | V(input)/100 | ||
Maximum cont. input current (Im) | 25A@55℃ | ||
Reverse current | 25A | ||
Accuracy of current measuring | ±0.05A | ||
Communication | PLC | ||
Communication capability, the length of cable loop | 500m | ||
Operating temperature | 40℃~ +80℃ | ||
Enclosure Rating | NEMA Type 6P/IP68 | ||
Safety Compliance | UL 1741 (Ed.2, Rev. February 15, 2018),CSA C22.2 No. 330-17 |
Application Diagram
Clean the surface of the position where the tail module needs to be installed.
Tear off the adhesive of the 3M glue behind the back buckle, and paste it on the cleaned position.
Clip the tail module into the back buckle (The picture is for reference, which can be adjusted according to the actual situation).
Connect the input and output terminals of the tail modules according to the sequence shown in the figure below.
Component | Model | Item | Parameter |
Tail Module | FR-PVMS-TSXX | Input operating voltage range | 12V-60V |
Accuracy of voltage measuring | ±0.2V | ||
Maximum System Voltage | 1500V | ||
Output voltage after shutdown | V(input)/100 | ||
Maximum cont. input current (Im) | 25A@55℃ | ||
Reverse current | 25A | ||
Accuracy of current measuring | ±0.05A | ||
Communication | PLC | ||
Communication capability, the length of cable loop | 500m | ||
Operating temperature | 40℃~ +80℃ | ||
Enclosure Rating | NEMA Type 6P/IP68 | ||
Safety Compliance | UL 1741 (Ed.2, Rev. February 15, 2018),CSA C22.2 No. 330-17 |